1.WATER IMPERMEABLE SANDWICH RUNNING TRACK SURFACE SYSTEM – WORLD ATHLETICS SPECIFICATIONS COMPLIED.

This System come in the thickness of 13-15mm. The 13mm thickness is used for sandwich system globally by all the reputed producers. It is composed of polyurethane material with a PUR-bound elastic layer based on recycled granules (Cushioned base layer) is characterized by its shock absorbing quality. The durability and Resiliency comes from its 3mm PUR (Wear layer). The top-quality PFS’s PU Resin layer is highly resilient, which provides non-slip, spike resistance to this excellent athletics surfacing system.

This system is certifiable in case of testing required as Class 1 and Class 2.

Methodology:

It is applied on well cured fine asphalt or smooth, waterproof concrete, with first layer PFS PU Primer then second layer10-12mm paved Recycled Rubber with polyurethane binder or gluing of prefabricated rubber roll. The third layer also called as filler layer is the polyurethane filler which is used to seal the base layer. Fourth layer also called Wear layer is Self Levelling polyurethane provides resiliency to the system is used before broadcasting EPDM granules on top as finish layer. The Line Marking can be done after drying and removing the extra EPDM.

1^st Layer PFS-PUP-01 – Polyurethane primer or PFS-2KGL-01 Dual Component Glue

2^nd Layer Mixture of PFS-PUB-02 and SBR granules (recycled rubber) or PFS-RR-02 Prefabricated Rubber Roll.

3^rd Layer PFS-PU-PF-03 – Pore Filler.

4^th Layer PFS-PU-SL-04 Self Levelling.

5^th Layer PFS-G-EPDM-13 EPDM to be Broadcasted.

6^th Layer PFS-PU-LM-RT-06 Line Marking

2.WATER IMPERMEABLE FULL PUR running TRACK SURFACE SYSTEM

– WORLD ATHLETICS SPECIFICATIONS COMPLIED.

This System come in the thickness of 13-15mm. It is biomechanically faster and suitable for competition track for the professional-end. This surface has proven with superb track values with controlled body movement of the athlete. The top layer enables maximum resilience and durability of the track. These tracks are considered to be very durable and in long run considered as low lifecycle cost.

This system is certifiable in case of testing required as Class 1 and Class 2.

Methodology:

It is applied on well cured fine asphalt or smooth, waterproof concrete, with first layer

of PU primer for surface adhesion, In second layer PFS PU pore filler is applied as a Filler layer, then follows the third layer which is base layer where laying of FULL-PU pigmented polyurethane system is done then fourth layer is broadcasting of SBR (recycled rubber) above it a fifth layer containing same FULL-PU polyurethane pigmented system casted again and SBR broadcasted on top again and the Sixth layer which is wear layer with the full-PU highly viscous liquid followed by seventh layer of EPDM granules 1-3mm broadcasted on top. The Line Marking can be done after drying and removing the extra EPDM.

Layers:

1^st Layer PFS-PUP-01 – Polyurethane Primer.

2^nd Layer PFS-PU-PF-03 – Pore Filler.

3^rd Layer Mixing of PFS-PU-SL-04 Self Levelling with SBR granules (recycle rubber).

4^th Layer Mixing of PFS-PU-SL-04 Self Levelling with SBR granules (recycle rubber).

5^th Layer casting of PFS-PU-SL-04 Self Levelling.

6^th Broadcasting of EPDM granules on freshly casted PFS-PU-SL-04 Self Levelling.

7^th Layer PFS-PU-LM-RT-06 Line Marking.

3.WATER PERMEABLE SPRAY COAT RUNNING TRACK SURFACE SYSTEM

– WORLD ATHLETICS SPECIFICATIONS COMPLIED.

This System come in the thickness of 13-15mm.This PFS spray coat system is the most cost-effective and value for money. The sprayed top layer polyurethane provides excellent spike resistance. The uniqueness of this system is that it is slip-proof which enables a good grip specially wet and rainy season. Mostly used in all category of schools and other leisure facilities. It can be used in all-weather condition. This PFS system is very reliable and quite popular in various sports facilities due to its optimum lasting and low cost.

Methodology:

It is applied on well cured fine asphalt or smooth, waterproof concrete, with first layer PFS PU Primer then second layer 11mm-13mm paved Recycled Rubber with polyurethane binder or gluing of prefabricated rubber roll. The third layer also called as filler layer is the polyurethane filler which is used to seal the base layer. Fourth layer also called Wear layer where spray coat is applied in average thickness of 2mm. The ingredient of spray contains PFS EPDM and pigmented polyurethane. The Line Marking can be done after drying.

Layers :

1^st Layer PFS-PUP-01 – Polyurethane primer or PFS-2KGL-01 Dual Component Glue

2^nd Layer Mixture of PFS-PUB-02 and SBR granules (recycled rubber) or PFS-RR-02 Prefabricated Rubber Roll.

3^rd Layer PFS-PU-PF-03 – Pore Filler.

4^th Layer PFS-PUB-PIG-02 Pigmented PU.

5^th Layer PFS-G-EPDM-515 EPDM to be Mixed.

6^th Layer PFS-PU-LM-RT-06 Line Marking 

4.WATER PERMEABLE SPRAY COAT ACRYLIC RUNNING TRACK SURFACE SYSTEM

This System come in the thickness of 13-15mm.This PFS spray coat system is the most economical system. This system is also called as hybrid system as its made up of both PU based and water based material. The sprayed top layer is water based which provides great resistance to wear and tear. The base layer is similar to the common spray coat system and its PU based as well. This system can be applied for all types of school and university. This PFS system is maintenance friendly and quite popular in various sports facilities due to its optimum lasting and low cost.

Methodology:

It is applied on well cured fine asphalt or smooth, waterproof concrete, with first layer PFS PU Primer then second layer 11mm-13mm paved Recycled Rubber with polyurethane binder or gluing of prefabricated rubber roll. The third layer also called as filler layer is the water based acrylic filler which is used to seal the base layer. Fourth layer also called Wear layer where spray coat is applied in average thickness of 2mm. The ingredient of spray contains PFS EPDM and pigmented acrylic resin. The Line Marking can be done after drying.

Layers :

1^st Layer PFS-PUP-01 – Polyurethane primer or PFS-2KGL-01 Dual Component Glue

2^nd Layer Mixture of PFS-PUB-02 and SBR granules (recycled rubber) or PFS-RR-02 Prefabricated Rubber Roll.

3^rd Layer PFS-AC-PF-03 – Pore Filler.

4^th Layer PFS-ACB-PIG-02 Pigmented Acrylic.

5^th Layer PFS-G-EPDM-515 EPDM to be Mixed.

6^th Layer PFS-AC-LM-RT-06 Line Marking